ClickCease

PrimoChill System Reboot - Cooling Loop Treatment

$6.95

SKU: PC-SBOOTN/AAvailability : In stock - In Boise, ID USAIn StockOut of stock

Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage.... Read more

HURRY! ONLY LEFT IN STOCK.

Order in the next to get it between and hoursminutes
Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage. Similar to Sysprep this flush style solution will cleanse out any debris/residue leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. The beauty of ReBoot is it's ability to pull color from stained components.
Features
    • Water Based
    • Environmentally Responsible, Safe, and Non Toxic Product
    • Pre-Mixed. Just Add to a Gallon of Water
    • Safe on All Plastics, Rubbers, and Miscellaneous Gasket Materials, Including Acrylic.
Specifications
      • Bottle Size: 15ml
      • Dosage: Mix with 1 Gallon of DI or distilled water
      • Shelf Life: 2 Years, Unopened
Compatibility

      ReBoot is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe!

      This item is not compatible with aluminum water cooling components.

Included Parts
      • 1x 15ml Bottle of ReBoot (makes 1 gallon of coolant)
Instructions

1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of ReBoot into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
3.Add mix to cooling loop.
4.Fill loop with treated solution and be sure to remove as many air bubbles as possible.
5.Start loop pump and begin circulating the treated solution.
6.Run treated solution for at least 24 to 48 hours to ensure loop is properly flushed and treated.  While using for longer periods of time doesn't have negative effects, ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
7.Drain System. Inspect drained solution for debris or foreign particles. Dispose of drained solution. Repeat flush if needed.
8.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
9.Drain system.**.
10.Fill loop with your choice of coolant and begin water-cooling.

** Reboot needs to be flushed from the system until no foam is seen and water runs clear


Method 2

1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
2.Fill entire loop with DI or distilled water. (leave room for System Reboot)
2.Add Full bottle of the system ReBoot Pre-Treatment.
3.Top off with DI or distilled water if needed.
4.Start loop pump and begin circulating the treated solution.
5.Run treated solution for at least 24 to 48 hours to ensure loop is properly flushed and treated.  While using for longer periods of time doesn't have negative effects, ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
6.Drain System. Inspect drained solution for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
7.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
8.Drain system.**.
9.Fill loop with your choice of coolant and begin water-cooling.

** Reboot needs to be flushed from the system until no foam is seen and water runs clear

Warnings
  • Do not mix with any pre-mixed coolants.
  • This item is not compatible with aluminum water cooling components
  • Not responsible for any hardware damage. Use at your own risk.

Customer Reviews

Based on 7 reviews
100%
(7)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Robert F.
PrimoChill system Reboot

Product is easy to use & works great for cleaning custom loops.

M
Martin S.
Fast delivery

Quick and easy

E
Eric G.
Reboot

Emptied system and flushed with clear water and put in reboot and in 2 hours all the staining in tubes was gone. Will run for 2 days and see what it looks like

J
John V.
Look no further!

System Reboot is the truth! I had a gray opaque fluid in my system for a full year so naturally there was some build up in my blocks etc.. I wanted to be lazy and not take my loop apart so I ran System Reboot for 48 hours and let me tell you! There's absolutely not cloudiness in my runs or res. The blocks look like I disassembled and cleaned them. Super happy with this product.

J
Joseph G.
Superb!

So, I replaced all of my lines, disassembled and clean both of my blocks (GPU and CPU), flushed the radiator with scolding hot water at 20PSI for twenty minutes in each direction, baked my radiator dry, soaked my reservoir in SysPrep for two hours, flushed clean, flushed out the pump, then reassembled.
Ran distilled water for about ten minutes making sure nothing was leaking and to bleed the air. Not a sign of any color or debris from my year of using purple PrimoChill Ice Intensified coolant. Then I poured in the full bottle of reboot... and, within SECONDS, I could see the water turning purple... then I could see little flakes of purple where the old coolant had apparently found nooks in the radiator... then more and more the water turned darker and more and more flakes were getting trapped in my filter... I watched in awe as this stuff went to work.
- To the reviewer saying your stains didn't go away:
If you have really bad staining it's probably REALLY deep in the material - Reboot, I believe, is just a mix of solvents frequently used in coolant dyes... it will eventually be used up and not be able to remove any more stains - you may be at that point if you didn't replace your lines.

Shipping Policy:

Carriers:
We ship via USPS and Fed Ex . For international orders we ship via Fed Ex and DHL. Air shipments will be delivered on the normal business day scheduling provided via the selected carrier. Unfortunately we are not able to ship out orders for specific Saturday deliveries. During peak season carriers suspend their delivery guarantees and delays are common.

Same Day Shipping:
We strive to ship out every order same day if the order is placed by 2:00pm MST. If not, the order will ship out the next business day. Orders with custom powder coating (SX Colors) can take up to 1-4 business days to coat, inspect and pack so please be aware of this. Selecting overnight shipping method or rush fee will not ensure that your order ships same day and is not guaranteed.

Shipment Refusal:
If a shipped order is refused or returned undelivered there will be a mandatory 20% restocking fee, a $20.00 Return Service Fee and no refund on the shipping cost. Please be aware that refusal is significantly more expensive then using your own carrier and is NOT recommended. 

Damaged Items:
All packages are fully insured at no additional charge.

If you receive a damaged package, you must notify us within 48 hours of receipt. Sending back damaged merchandise voids the shipping insurance and no credit will be given. Damaged packages must be held for ten days with original packaging for carrier inspection. All packaging and packing materials must be kept for this inspection.

If your package is marked delivered and not received, please contact support@primochill.com immediately for further assistance.

International Shipping:

For international customers please reference this page for duties/tax information. 

Returns Policy for New Products:

RMA Number:
Returns will not be accepted without an RMA number provided from support@primochill.com.

Product Return:

Products returned for credit must be received within 30 days of invoice date and a 15% restocking fee may apply. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.

All returned items must be in like new condition with all related parts including screws, manuals, etc. If you have lost, thrown away, scratched or opened sealed boxes or bags – a higher restock fee may apply upwards of 50%. Products that have had fluid ran through them are subject to these higher restock fees.

Only regular priced items may be refunded, unfortunately sale items cannot be refunded this includes B-Stock and Used/Open Box Products.

If a customer is misleading about the defect and evidence of incorrect install/use or tampering has occurred, the return my denied and a higher restock fee may be assessed or the return may be completely denied. A qualified PrimoChill.com technician will test each returned product for defects.

PrimoChill.com will not assess a restocking fee for defective products.

Return Shipping
Customers are responsible for ALL return shipping charges on merchandise for any reason. Unless otherwise noted, shipping on products and returns is non-refundable, and returning a product comes at the expense of the customer. Customer will be responsible for paying shipping products/orders back to PrimoChill.com. For no reason do we refund the outbound shipping cost.

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart
Free Shipping for all orders over [money]
Add [money] more to get FREE SHIPPING! (US Customers Only)
Congratulations! You've got free shipping! (US Customers Only)

Your cart is empty.

Return To Shop

Add Order NoteEdit Order Note
RUSH MY ORDER
Estimate Shipping
Add A Coupon

Estimate Shipping

Rush your order processing? Only

RUSH MY ORDER

Add A Coupon

Coupon code will work on checkout page

PrimoChill System Reboot - Cooling Loop Treatment

$6.95