The Bykski AIO series brings the chill! The Bykski B-FRD3080FE-RBW integrated GPU cooler is a combination of pump, water block, radiator, and teflon lined tubing connected as an integrated unit to form a complete and effective internal self-circulating water cooling system. The system is dedicated to the cooling of the GPU only. The GPU block is a an electroplated copper base plate with outstanding thermal conductivity that includes addressable RGB built in. Matching 120mm A-RGB fans cool the radiator while lighting up your case.
- Finest Craftsmanship
- Designed to Fit Standard G 1/4in. Thread Fittings
- Fully Integrated
- Block Material:Electroplated High Purity Copper /Acrylic
- Thread: G 1/4in.
- Speed: 400-1500 RPM +/- 10%
- MAX Air Flow: 64.8CFM
- Air Pressure: 2.94mm-H20
- Noise: 33.6dBA
- Bearing: Hydraulic
- Voltage: 12V Fan / 5V LED
- Pump Connector: 3-Pin
- Pump Speed: 2300 RPM
- Voltage: 12V
- Material: Copper (radiator) / Teflon (tube)
- Loop: Non-Aluminum
- (Including but not limited to the following models)
- nVidia GeForce Founders Edition RTX 3080
- Please check if your PCB is consistent with picture, to ensure compatibility
- Compatibility based on Founders design only, block may not fit altered / super clocked and other third party variations that deviate from this design.
- Fittings: G 1/4in. Thread
- Stock Backplates: Due to mounting variances between cards, stock backplates not guaranteed to fit.
- 1x Full Coverage Integrated GPU Water Block / Pump / Radiator
- 2x Stop Fitting
- 1x Mounting Hardware
- Thermal grease
- 1x 5v Addressable RGB (RBW)
- 2x Fans
This is a repair or replace only item. Returns not accepted on compatibility issues or block has had water/fluid run through it.
Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions.
Not responsible for any damage caused by or when using this product. Please use at your own risk.