PrimoChill Vue - Computer WaterCooling Coolant, Visual Flow, Solid/Non-Transparent, Full Protection, PrimoPrep Included, Proudly Made in the USA (32oz/.9L)
Not sure this is the right coolant? Answer two questions
Pick your color
24 colors. Filter by family, or press Compare colors to see two to four side by side.
Tap two to four colors, then press Compare. Done goes back to choosing.
Why builders choose Vue
Vue is PrimoChill's visual-flow show coolant, built for showcase builds, photo shoots and events. Fine particles held through the fluid swirl and stream as the pump runs, so you can watch your loop move. It comes ready to pour in 24 colors, made by hand in small batches in the USA, with a bottle of PrimoPrep in the box to get your loop ready for it.
The particles travel with the coolant, so every bend, split and pass through a block shows in the tubing.
Vue is opaque, so it reads as one rich color in any light. UV Green, UV Green SX and UV NV Green also glow under UV.
Pre-mixed and pre-dyed. Nothing to measure and nothing to add.
A 2 oz bottle of PrimoPrep comes in the box to condition the loop before the fill.
Vue is water-based and flushes clean when you want a new look.
Handmade in small batches, non-toxic and biodegradable, with natural growth inhibitors and non-toxic corrosion inhibitors already in the mix.
Is Vue right for your loop?
Works with
- Show builds and display machines run for sessions
- Copper, brass and nickel-plated blocks and radiators
- Acrylic, PETG, glass and PVC tubing
- Standard rubber gaskets and O-rings
- PrimoChill fittings (only the cap is coated, so nothing leaches into the fluid)
Keep out of a Vue loop
- Machines that run around the clock
- Any aluminum part, including radiators and aluminum kits
- Silver or silver-plated parts, including kill coils
- Fittings coated on the inside, where the color touches the coolant
- Any other coolant, dye or additive, and plain water
- Loops that ran another brand's pastel coolant, which can leave residue even after a flush
Switching from another coolant or cleaner? Some leave a coating behind, so clean the loop with System Reboot first. The full compatibility list is on keepingit.cool.
Getting the most from Vue
Vue's color stays even in a loop that has been properly prepped. The included PrimoPrep and the steps below get it there.
Air breaks down the suspension. Pour slowly, cycle the pump on and off, and keep bleeding until the loop is free of bubbles. Never let the pump run dry.
Vue is made for show builds. Keep pump time under 8 hours a day, turn the system off when it is not in use, and run the pump as slow as your temperatures allow.
Never add water or anything else. A low reservoir gets more Vue.
How long a fill lasts depends on pump hours, prep and air in the loop. A fresh fill around every six months keeps the color at its best.
Vue is water-based and can freeze in transit. In cold weather, choose a faster shipping option.
Watch the video
Filling a loop with Vue
- Clean every partNew blocks and radiators carry machining oil and flux. Flush the radiators and rinse the blocks before anything goes together.
- Leak test on distilled waterRun the loop on plain distilled for 12 to 24 hours with only the pump powered.
- Run SysPrep for 48 hoursThen drain and rinse with distilled until the water runs clean. Loop already ran another coolant? Use System Reboot here instead.
- Run PrimoPrep for 72 hoursMix the included 2 oz bottle into 32 oz of distilled or DI water, circulate, then drain and rinse.
- Fill with VuePour slowly at a low pump speed, bleed until the loop is clear of air, and note the fill date.
Step-by-step guides: prepping a new loop and reconditioning a loop that ran coolant.
- Vue, 32 oz (.9 L)
- PrimoPrep, 2 oz
Read the full care and warranty details
Please read all of this before filling your loop. Skipping these steps can void the warranty.
Vue is made for show builds and experienced builders. For a machine that runs all day, Ice or Pure is the better pick. Vue needs more attention and maintenance than a clear coolant. Keep an eye on the fluid and the parts in your loop, and drain and inspect right away at any sign of growth or corrosion.
Keep air out. Do not let the pump draw air or run dry; air causes Vue to break down. Fill slowly, with direct control over the pump so you can stop it quickly. Run it at a medium-low speed and cycle it on and off while filling.
Existing loops and old dye. Vue is best in a newly built loop. In a loop that ran a dyed coolant, Vue can pull old dye out of the parts, radiators especially, and shift color slightly. Water alone will not remove it, so clean with System Reboot first.
Do not run it 24/7. Continuous circulation breaks Vue down quickly, shortens its life and can leave buildup in the loop. Keep pump time under 8 hours a day and turn the pump off when the system is not in use.
Color can settle. Over time the color and texture in the loop may differ slightly from the bottle, and clear areas can form at the top of the reservoir and tubes as the fluid thickens slightly. This does not affect performance; running the pump mixes it back.
Nothing else goes in. Vue already contains biological inhibitors. Adding any other coolant, additive or water can cause problems and voids all support and warranty. Plan to replace Vue around every six months, sooner if it changes.
Known incompatible parts include anything with aluminum in contact with the coolant (aluminum radiators, reservoirs and kits) and fittings with finished internals, where the color touches the coolant.
Freezing. Vue is water-based and can freeze if left in the cold. Keep this in mind when choosing a shipping option.
PrimoChill is not responsible for any hardware damage. Use at your own risk.
What buyers said
Left by people who bought this part here. Compatibility reports are the useful ones — if you fitted it, say which board.
Questions people ask about this coolant
Answers specific to PC-V32K-BCV. If yours isn't here, ask — we'd rather talk you out of the wrong part than sell you one.
What does this part fit?
Is it in stock, and when will it ship?
Can I return it if it turns out not to fit?
Who handles the warranty?
Is shipping free?
Are printed instructions included?
Do I need anything else to use it?
Ask us before you order
Send your exact hardware model and we'll confirm the right part before you spend $29.99 — or tell you honestly that this isn't the one.
Returns are accepted within 30 days and are easy to start in the support center. Unopened items can be returned for store credit with no restocking fee; other returns carry a restocking fee, higher for items that have been installed or used.