ClickCease

PrimoChill SysPrep - Cooling Loop Pre-Treatment

$6.95

SKU: PC-SPREPN/AAvailability : In stock - In Boise, ID USAIn StockOut of stock

Primochill Sys Prep was created to address the immense customer requests for a clean and well maintained cooling system. Any successful venture into water-cooling starts with a true cooling loop preparation... Read more

HURRY! ONLY LEFT IN STOCK.

Order in the next to get it between and hoursminutes
Primochill Sys Prep was created to address the immense customer requests for a clean and well maintained cooling system. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Let Primochill Sys Prep take the confusion out of what is causing the filth and let it “flush” and “prep” your next cooling loop. Over the last decade, PrimoChill has strived to provide the water-cooing community quality products that inspire our customers. Get clean and protect your investment with PrimoChill Sys Prep.
Features
  • Water Based
  • Environmentally Responsible, Safe, and Non Toxic Product
  • Pre-Mixed. Just Add to a Gallon of Water
  • Safe on All Plastics, Rubbers, and Miscellaneous Gasket Materials, Including Acrylic.
Specifications
  • Dosage: Mix with 1 Gallon of DI or distilled water
  • Shelf Life: 2 Years, Unopened
Compatibility
  • Sysprep is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe!
  • Not compatible with aluminum water cooling components.
Included Parts
  • 1x 15ml Bottle of SysPrep (makes 1 gallon of coolant)
Instructions

    1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
    2.Empty bottle of SysPrep into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
    3.Add mix to cooling loop.
    4.Fill loop with treated water and be sure to remove as many air bubbles as possible.
    5.Start loop pump and begin circulating the treated water.
    6.Run treated water for at least 12 to 24 hours to ensure loop is properly flushed and treated.  While using for longer periods of time doesn't have negative effects, Sysprep is not an effective final coolant and should be replaced with coolant before any extended use of computer.
    7.Drain System. Inspect drained water for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
    8.Fill loop with your choice of coolant and begin water-cooling.**

    ** Residual treated water left in your loop is not harmful. If you prefer to remove it, do a simple rinse of the loop with fresh DI or Distilled Water. This rinse will not affect the results of the Sys Prep just performed.


Warnings
  • Do not mix with any pre-mixed coolants as it will over saturate the inhibitors.
  • Not responsible for any hardware damage. Use at your own risk.
  • Not compatible with aluminum water cooling components.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
e
eric e.
Great Prep Solution!

12 hours in and its a clean system! Im not real knowledgable of chem treatment but this gave me the confidence it was clean and ready to go.

J
Jason K.
Fantastic.

I used to use different methods to clean and flush my loop with varying results. But then I started using the Primochill SysPrep and have never looked back. It does exactly what it says it does. Flushes out debris, cleans away buildup, removes everything that would affect the PH and efficiency of the coolant, etc. Keeps coolant from breaking down.

Shipping Policy:

Carriers:
We ship via USPS and Fed Ex. For international orders, we ship via Fed Ex. Air shipments will be delivered via the selected carrier on the regular business day scheduling. Unfortunately, we cannot ship out orders for specific Saturday deliveries. During peak season, carriers suspend their delivery guarantees, and delays are expected.

Same-Day Shipping:
We strive to ship out every order the same day if the order is placed by 2:00 pm MST. If not, the order will ship out the next business day. Orders with custom powder coating (SX Colors) can take up to 1-4 business days to coat, inspect and pack, so please be aware. Selecting an overnight shipping method or rush fee will not ensure that your order ships the same day and is not guaranteed.

Shipment Refusal:
If a shipped order is refused or returned undelivered, there will be a mandatory 20% restocking fee, a $20.00 Return Service Fee, and no refund on the shipping cost. Please be aware that refusal is significantly more expensive than using your own carrier and is NOT recommended. 

Damaged Items:
All packages are fully insured at no additional charge.

If you receive a damaged package, you must notify us within 48 hours of receipt. Sending back damaged merchandise voids the shipping insurance and no credit will be given. Damaged packages must be held for ten days with original packaging for carrier inspection. All packaging and packing materials must be kept for this inspection.

If your package is marked delivered and not received, be sure to get in touch with support@primochill.com immediately for further assistance.

International Shipping:

For international customers, please reference this page for duties/tax information. 

Returns Policy for New Products:

RMA Number:
Returns will not be accepted without an RMA number provided by support@primochill.com.

Product Return:

Products returned for credit must be received within 30 days of the invoice, and a 15% restocking fee may apply. If 30 days have passed since your purchase, unfortunately, we can’t offer you a refund or exchange.

All returned items must be in like-new condition with all related parts, including screws, manuals, etc. If you have lost, thrown away, scratched, or opened sealed boxes or bags – a higher restocking fee may apply upwards of 50%. Products with a fluid run through them are subject to these higher restocking fees.

Only regular-priced items may be refunded, unfortunately, sale items cannot be refunded. This includes B-Stock and Used/Open Box Products.

If a customer is misleading about the defect and evidence of incorrect installation/use or tampering has occurred, the return my denied, and a higher restock fee may be assessed, or the return may be denied entirely. A qualified PrimoChill.com technician will test each returned product for defects.

PrimoChill.com will not assess a restocking fee for defective products.

Return Shipping
Customers are responsible for ALL return shipping charges on merchandise for any reason. Unless otherwise noted, shipping on products and returns is non-refundable, and returning a product comes at the customer's expense. The customer will be responsible for paying for shipping products/orders back to PrimoChill.com. For no reason, do we refund the outbound shipping cost.

Cancellations/Changes:

Once an order is placed on our e-commerce website, it cannot be canceled or changed. This is because our fully automated systems immediately start processing the order, which cannot be stopped or reversed. Therefore, we advise customers to double-check their orders before making a purchase.

Additionally, we would like to emphasize that our e-commerce website ships 98.5% of orders on the same day they are placed by 2:00 pm MST. Allowing cancellations after an order is placed would significantly slow down our shipping process and potentially affect the delivery times for other customers.

We understand that it can be frustrating to be unable to cancel an order, but we ask for your understanding in this matter. By adhering to our cancellation policy, we can ensure that our automated systems and shipping processes continue running smoothly, allowing us to provide fast and efficient service to all our customers.

We understand that sometimes mistakes can happen, and customers may accidentally order the wrong item or change their minds about a purchase. In such cases, we suggest that customers consider our return policy instead.

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart
Free Shipping for all orders over [money]
Add [money] more to get FREE SHIPPING! (US Customers Only)
Congratulations! You've got free shipping! (US Customers Only)

Your cart is empty.

Return To Shop

Add Order NoteEdit Order Note
RUSH MY ORDER
Estimate Shipping
Add A Coupon

Estimate Shipping

Rush your order processing? Only

RUSH MY ORDER

Add A Coupon

Coupon code will work on checkout page

PrimoChill SysPrep - Cooling Loop Pre-Treatment

$6.95