We highly recommend visiting https://keepingit.cool/vue before purchasing this product so you are aware of all the incompatibilities as well as the limits of Vue usage.

PrimoPrep is a mandatory system prep and must be used prior to filling your system with this Vue product, this is why it is included with your purchase.

PrimoChill’s Vue was specifically developed for that experienced user looking to create an unrivaled aesthetic in their liquid cooled PC. It’s an environmentally friendly fluid that combats issues typically seen in other watercooling fluids. Vue's exclusive water-based formulation allows it to stay suspended longer allowing longevity and an easy flush to any system. With its unique visual traits, Vue is sure to bring another dimension to any loop.

We strive to provide the most accurate photos for color representation. With this in mind, different lighting, viewing monitors and screen resolutions, as well as settings may give a different variation of the actual color. PrimoChill cannot accept returns on coolant based on perceived color.

WARNING: Use of this product with aluminum components (such as aluminum constructed radiators) is not recommended and will void the fluid warranty. PrimoChill will not support or replace fluids used with an aluminum component including radiators.

VUE is a water-based formulation that if left to the elements can freeze. Please keep this in mind when deciding on delivery service.

Features

Water-based fluid
Non-toxic & environmentally friendly
Biodegradable
Handmade in small batches for unmatched quality control
Pre-Dyed
Flushes clean from loop
Visual indicator useful to illustrate fluids flow patterns
Includes Natural microbial growth combatant
Includes Non Toxic Corrosion inhibitors

Specifications

Specifications

Bottle Size: 32 fluid ounces
PrimoPrep: 2oz bottle mixes with 32oz distilled or DI water
Shelf Life: 6 Months (From Purchase Date)
Mix Ratio: None-Ready to use

Compatibility

We highly recommend visiting https://keepingit.cool/vue-incompatibility as it is continually updated with known compatibility issues.

Additives / Fluids: VUE (same color only).
Do not mix ANY additional additives, coolants or silver coils with Vue. This will change the formulation of Vue causing undesirable results.
Vue is NOT compatible with Mayhems Pastel fluid. Results may vary even after a full system flush if your loop previously had Mayhems pastel.
Not compatible with any aluminum components including radiators.
Safe to use with all rubber gaskets, acrylic tubing, pvc tubing, petg tubing, glass tubing, as well as nickel and copper components.
Use of certain cleaners and coolants (such as Mayhems Blitz,Thermaltake C1000 or EK Cryofuel) in your loop prior to VUE require extensive cleaning due to coating of the components. Vue should be used at your own risk only after extensive cleaning.

Known incompatible components include but NOT limited to:

Any Wetted Aluminum
Thermaltake RL Series - Radiators
EK Aluminum Kits
Enermax - NEOChanger Reservoir
X4 Photon Reservoir/Pump Combo
Fittings w/ finished internals (black or coloring in contact with coolant)

Warnings

PLEASE BE SURE TO READ ALL THE WARNINGS BELOW TO AVOID VOIDING YOUR WARRANTY.

PrimoChill has gone to great lengths to make Vue as easy to use as possible, but please keep in mind that Vue is for experienced users looking for that extra aesthetic and requires more attention and maintenance. During the filling of your loop, induction of any air is NOT recommended. Allowing the pump to suck air into the loop or running it dry may cause PrimoChill Vue to break down and fail. Slowly add PrimoChill Vue to your system to make sure you are not adding any additional air into the system. It’s recommended to have direct manual control over the speed/power of your pump when adding PrimoChill Vue to your loop. Run it at a medium-low speed with the ability to turn off the pump quickly if necessary. Cycling your pump on and off during the filling process will help in reducing the amount of air that you allow into the system.

For best results, use Vue with a newly built watercooling loop. If this is not possible, first ensure that each component is thoroughly cleaned by hand and dried. Please visit our cleaning guide @ https://keepingit.cool/vue-cleaning-guide

Vue has a HIGH attraction to dyes. It's possible that Vue may leach old dyes out of components that had previous dyed coolants ran through them (radiators in particular). No amount of flushing with water will remove all previous dyes. This may result in Vue changing color slightly. For best results flush your system with PrimoChill System ReBoot prior to using VUE in existing systems that contained dyed coolant.

Continuous circulating VUE 24/7 will breakdown Vue quickly causing loss in effect as well as possible build up in the system. Do not run Vue 24/7. Continuous circulating VUE 24/7 will severely decrease lifespan. Turn the pump off when system not in use. Vue should not be moving for more than 8 hours continuously.

Please be advised that the color and texture of Vue may change slightly compared to the fluid in the bottle over time once you put it in your loop. Vue may develop clear areas in the top of the reservoir and tubes as it reacts with metals and chemicals in your loop resulting in a slightly thicker fluid. This will not impact the performance of Vue. Running the pump will return Vue to its original state.

This product is NOT intended to be used in conjunction with any other coolant or additive. Vue contains biological inhibitors so no additional coolant or additives are needed. Adding anything extra could result in adverse effects and will void all support and warranty. Please keep a close eye on the fluid and parts in your loop. Drain and inspect immediately if any sign of growth or corrosion develops. PrimoChill recommends replacing Vue every 4-6 months (or sooner) for best results!

PrimoChill is not responsible for any hardware damage. Use at your own risk.

Instructions

Prep instructions: Please read warning tab before using Vue.

Below are MANDATORY steps for using Vue in your system not following these steps will lead to a break down of Vue and a system tear down may be needed:

Adding Vue To A New Loop - 2 Step Process:

Using PrimoPrep to get your system ready for Vue.

Step 1: Fill system with PrimoChill PrimoPrep and run for minimum of 72hrs.
Step 2: Drain and Flush with Distilled or DI water, flush thoroughly.

Switching To Vue In A Pre-existing Loop - 3 Step Process:

If you are changing out your current coolant with Vue then please follow the instructions below.

Step 1: Flush system with PrimoChill System Reboot.
Step 2. Drain and Fill with PrimoChill PrimoPrep and run for minimum of 72hrs.
Step 3: Drain and Flush with Distilled or DI water, flush thoroughly.

Please view our Filling Guide here.

Candy SX finishes can vary in tone based on surfaces. Knurled surfaced appear darker than smooth surfaces!